BMW M35080

Item specifics

Type	Mileage Programmer

Detailed Info

Correct mileage for BMW odometers with M35080 chip. It can support BMW E65 / E38/ E39/ E46, etc.
Software version: 3.0

BMW M35080

Description:

Correct mileage for BMW odometers with M35080 chip. It can support BMW E65 / E38/ E39/ E46, etc.
Software version: 3.0

Functions:

1.backup date
2.View data
3.read original mileage
4.clear KM data area
5.online direct data correction
6.no need to remove the needle of the odometer
7.can enter any KM value

This item can erase the data starting from "00",no need to replace 35080 chip, correct the mileage for BMW without removing the chip from the cluster, simply solder the line. Easy, simple and safe!

Package list:

1pc x BMW 35080 Programmer Main Unit
1pc x 9 Pin Cable
1pc x Color Cable
1pc x Adapter

MOTO-BMW Motorcycle-specific Diagnostic Scanner

Item specifics

Type	Car Diagnostic Tool

Detailed Info

MOTO-BMW Motorcycle diagnostic scanner is a special purpose scanner aimed at motorcycles manufactured by BMW Company. It is used for the fault diagnosis of BMW motorcycle electronic control system.

MOTO-BMW Motorcycle-specific diagnostic scanner


moto-bmw software
moto-2 scanner user manual


Feature:

1. It covers BMW C, F, G, H, K and R series vehicles.
2. It supports the test of engine, ABS, instrument, and body system of motorcycle.
3. Supports on-line upgrading.
4. Its main function including: reading PC version, reading fault codes, motorcycle fault codes, component test, and data stream analysis and adjustment, etc.


Technical Parameter:

Mainframe I/O: standard serial / parallel port
Mainframe power supply: DC12V
Mainframe power: about 9W
Display screen: large LCD with touch screen, with backlight
Ambient temperature: 0-50°C
Relative humidity: <90%

CANDI Interface For GM TECH2

Item specifics

Type	Car Diagnostic Tool

Detailed Info

The CANDI module connects between the Tech 2 Flash’s diagnostic link cable and the OBD adapter. Once the CANDI module is connected, it can be used on all GM vehicle applications, even those vehicles using other platforms such as OBD I and OBD II.Includes the CAN diagnostic interface module and instruction sheet.

CANDI Interface for GM TECH2

Description:

An industry change in protocol from OBD II to Controller Area Network (CAN) has begun. In order to perform diagnosis on a vehicle that uses the CAN interface, you will need the Tech 2 Flash and a CAN diagnostic interface module.

The CANDI module connects between the OBD adapter and the Tech 2 Flash’s diagnostic link cable. Once the CANDI module is connected, it can be used on all GM vehicle applications, even those vehicles using other platforms such as OBD I and OBD II.Includes the CAN diagnostic interface module and instruction sheet.

Chrysler StarSCAN

Item specifics

Type	Car Diagnostic Tool

Detailed Info

The StarSCAN car diagnostic tool is the foundation of Chrysler Group vehicle service diagnostics. 

All Can Vehicles from 2004 to Present - Do them All!

Attention:This item do not have stock now!

The StarSCAN diagnostic tool, is the foundation of Chrysler Group vehicle service diagnostics.
All Can Vehicles from 2004 to Present - Do them All!
Engine, Transmission, Body, Chassis, Anti-Lock, Passive Restraint, Theft.
Any System the dealer can do you will be able to do!
No more dealer trips!

Functions：
Read & Clear Codes, Check Sensor Values, Check Inputs and Outputs.
Perform Actuator Tests, Monitors Status!
View Freeze Frame Data, Misfire Monitors and OBDII Data!
PID Data View, Record, Save, Playback all included!

FEATURES:
Color LCD display (enhanced optics for sunlight readability)
Faster vehicle scan, completes the task in seconds rather than minutes
Battery powered
Data display utilizes graphical presentation
Touch screen is the primary interaction
Data recording is self-contained
128 Mb RAM
The glove is integrated with the tool

Note:
The StarSCAN is not a replacement for the DRB III®.
StarSCAN supports the CAN vehicle protocol.
Plus 1 cd with reflash files included.
Back up card.

Package includes:
1.Startscan main unit
2.One cable
3.One power supply
4.On air fliter
5.One user instruction
6.One net cable
7.One software update package

Profi WIFI OBD2 CarBrain C168 Scanner

Item specifics

Type	Car Diagnostic Tool

Detailed Info

C168 scanner internet online update,Maintenance records management and Standard UBS port.It is easy to use and excellent performance.Bluetooth technology and has a full range coverage of vehicles.

CarBrain C168 Scanner


Description:

CarBrain C168 scanner is a  wireless automotive fault diagnostic scanner , C168 can be installed on most equipments that have Windows operating system, and it enormously enhances the compatibility between automobile examination and other automobile maintenance equipments.

Functions:

1.Internet online update, users can update software for individual vehicle models of their own choice via Internet
2.Maintenance records management
3.Standard USB port


Specification:

1.construction
1) Chipset: ATMEL Chip
2) Operating system: Windows
3) Dimension of COMBOX:12*8*2.5CM
4) Dimension of RF box: 6*5*2.5CM
5) Dimension of package: 40*34*14CM
6) Gross Weight: 4500g
7) Testing port 1:Bluetooth wireless
8) Testing port 2:diagnostic cable
9) Power supply of COMBOX:+12
10) Power supply of RF box: USB
11) Mainboard: Anti-electromagnetism industrial control mainboard
10) Communication mode:COM port and Bluetooth wireless

2.Features

1) Using Bluetooth wireless technology and based on windows operating system
2) Easy to use, compact size, excellent performance, quick response
3) Has a full-range coverage of vehicle types such as BMW, VW/AUDI, Seat, Skoda, Landrover, Citroen, Renault, Fiat, Volvo,Peugeot, Opel, Chrysler, Ford, GM, Obdii/Eobdii Can/OBD injectionsystem, Toyota/Lexus, Honda, Mitsubishi, Nissan, Mazda, Suzuki,Daihatsu, Daewoo and Kia
4) Equipped with CAN adapter to test auto model with CANBUS
5) Display data stream in waveform
6) Perform functions like reading DTC code, erasing DTC code, readingdata stream tests on Engines, AT, ABS, Airbags and other
 

GM Tech2 GM Diagnostic Scanner

Description: 

The Tech-2 is the same tester GM Technicians use to diagnose GM vehicles. The Vetronix Tech 2 comes with Authentic GM software and provides support for on-board diagnostics on all GM systems 1992 thru 2010.

Specification:

1.Features

1) Support for on-board diagnostics on all GM systems 1992 thru current year.


2) Authentic GM software in the Tech 2 Flash means the most comprehensive diagnostic software available for late model GM vehicles.

3) Removable hardware modules provide insurance against scan tool obsolescence.

4) Large, easy-to-read backlit screen.

5) RS232 & RS485 ports provide the avenue to connect future devices to your Tech 2 Flash.

6) Ability to capture stored DTCs, Freeze Frame, and Failure Record for later review.

7) Ability to view the status of vehicle diagnostic tests as they run.

8) Bi-directional The authentic GM 1992-current year software will provide full bi-directional control when performing power train, chassis, and body diagnostics.

9) Vetronix Tech 2 Specifications

10) Dimensions: 12

11) Microprocessor: 32 bit,16 MHz

12) Memory: 32 MB flash type II PCMCIA. Type III slot available for future expansion.

13) Communications: Integral RS232 communication port.

14) Screen: 3.8.8 backlit monochrome with full graphics capability: 320,40 pixels. Displays up to 9 vehicle parameters at once .Download Tech2 Brochure (5.2 Mb)

An industry change in protocol from OBD II to Controller Area Network (CAN) has begun. In order to perform diagnostics on a vehicle that uses the CAN interface; you will need the Tech 2 Flash and a CAN diagnostic interface module. The module connects between the Tech 2 Flashs diagnostic link cable and the OBD adapter. Once the module is connected, it can be used on all GM vehicle applications,even those vehicles using other platforms such as OBD I and OBD II.

BMW OPPS Diagnose And Programming Fit IBM T30 Version DIS V57 SSS V41

Description:
On vehicle models from the E65 on, BMW is for the first time using fibre-optic cables as standard for communication between control units.
The optical buses are notable for their high data transmission rate and they are not susceptible to electromagnetic interference. The optical buses in question are the MOST bus, primarily used for in-car entertainment electronics, and the byteflight bus, which serves predominantly safety-critical functions.

OPPS has been designed for encoding, individualising and programming (CIP) via the Software Service Station (SSS) and envisaged for use as part of the BMW diagnostic system (DIS) from DISPlus and Group Tester One (GT1). It is intended for testing and programming tasks from the E65 series, taking the place of the diagnostic head.

OPS is intended for rapid programming of control units.
When operated at the SSS, no diagnostic or technical measuring pro-cedures are possible, as no measuring technology is incorporated; in this instance, OPPS / OPS is used predominantly for programming control units (flashing). Communication with the vehicle can be performed both via the MOST and via the OBD interface. The OBD interface is required for the power supply to the OPPS / OPS and has communication properties via which the vehicle can be identified and the data to be programmed can be determined. From CIP version 7.0, it is possible to delete fault code memories via OPPS / OPS.

Supported languages:
SSS - German, French, Spanish, Italian, Swedish, Japan, Chinese, Korean, Thai, Taiwan, Russian, Indonesian, Turkish, Greek, Portugese;Netherland.
DIS - English/ Chinese

Nissan Consult Diagnostic Interface

Detailed Info

- Interface fitting for 14pin Consult Port of Nissan vehicles. 
- Heavy & robust casing for rough service use 
- Connects to PC via RS232 
- Powered from car battery over 14pin Consult Port of Nissan vehicles. 
- LED to control power and clock function

Nissan Consult Diagnostic Interface


Description:

1.Interface fitting for 14pin Consult Port of Nissan vehicles.
2.Heavy & robust casing for rough service use
3.Connects to PC via RS232
4.Powered from car battery over 14pin Consult Port of Nissan vehicles.
5.LED to control power and clock function


Function:

1.Monitor and Log dozens of realtime parameters
2.Check and clear engine fault codes before going to an expensive auto shop
3.Adjust the timing and idle
4.Power balance testing
5.Reset the self-learn codes
6.Control idle air valves, relays (AC, fans, etc), timing
7.Diagnose customer vehicles on-site
8.Speed up troubleshooting of electronically monitored components
9.No software is supplied with this device


Specification:

1.Workable Model

It works on all Nissan cars that have the grey 14pin Consult connector (you'll usually find it near the fusebox) (This cars are usually build from year 1989 to 2000) . Models such as: 300ZX, Z32, Maxima, 240SX, S13, S14, Skyline, SR20DE, SR20DET, RB20, Altima, Fairlady.

2.Software include

(Note that some of it is not free and need to be purchased)
DDLreader: DDLreader v.15c / DDLreader v.16c
ConZult
ScanTechNissan
Z-Control
SRTalk v.1.0
ZCSetup v.2.0
ZTalk v.1.1
Nissan Data Scan v.1.4
Nissan Data Scan v.1.51

Package list:

1pc x Nissan Consult interface
1pc x RS232 Cable
1pc x CD Drive